For the 2019 to 2026 Chevy Blazer crossover, two VIN characters carry the useful information. The 6th is a combined trim-and-drive code (for example, C decoded as 2LT front-drive and H as 2LT all-wheel drive on 2020 and later trucks), and the 8th is the engine: A for the 2.5-liter four, 4 for the 2.0-liter turbo and S for the 3.6-liter V6. The trap is that Chevy reshuffled the all-wheel-drive letters after 2019, so a J or K means a different trim on a 2019 than on a 2020. We decoded test VINs for 2019, 2020, 2023, 2024 and 2025 in NHTSA's vPIC on November 19, 2026, and this guide is built on those results.
The old truck-based Blazer is a different animal with a different VIN layout, so none of this applies to it. If that is what you are shopping, our K5 Blazer guide is the place to start.
3GNKB and the Ramos Arizpe plant
Every Blazer we decoded started with 3GNKB. The 3 means Mexico, and vPIC put all of them at GM's Ramos Arizpe plant, which shows up as an S in the 11th character. The 7th character was R on every pattern we ran, and the 10th is the year: K for 2019, L for 2020, P for 2023, R for 2024, S for 2025. That 11th character could change on the next generation. GM Authority reported in July 2026 that Blazer production is moving to Spring Hill, Tennessee, with no 2027 model year, so a future Blazer built there should not match this layout.
Get the VIN off the truck itself, from the windshield plate on the driver side and the door jamb sticker, and match both to the title. The 9th character is a check digit calculated from the other sixteen, so a single mistyped character in a listing will usually make the whole VIN fail. If a decoder rejects the number an ad gave you, ask the seller for a clear photo of the plate before you assume anything else. Our check digit explainer shows the math.
6th character: trim and drive together
Front-drive codes stayed fairly steady across years: A was L, B was 1LT, C 2LT, D 3LT, E RS and F Premier. The all-wheel-drive side is where it moves:
- 2019 - G 2LT AWD, H 3LT AWD, J RS AWD, K Premier AWD
- 2020, 2023, 2024 - H 2LT AWD, J 3LT AWD, K RS AWD, L Premier AWD (G came back as 1LT AWD on 2023 and 2024)
- 2025 - H, J, K and L as above; the A, B and G codes no longer decoded
So a 2019 with a K is a Premier, and a 2020 with a K is an RS. If someone is selling a "2019 RS" with a K in the 6th spot, the decoder says Premier. That is fine, but it should change your pricing and your questions. One more wrinkle: vPIC calls the 2019 trims 1LT, 2LT and 3LT, while Car and Driver says the 2019 lineup was named L, 2.5L, 3.6L Cloth, 3.6L Leather, RS and Premier, with the LT names arriving for 2020. Expect the badge on a 2019 and the decoder to use different words for the same truck.
8th character: the engine
This is the one to check against the hood. A decoded as 2.5 liters with four cylinders, S as 3.6 liters with six, and 4 as 2.0 liters with four. vPIC will happily decode any engine with any trim, including a 2.5 in an RS, because it matches patterns rather than real build combinations. What Chevy actually built is narrower. Kelley Blue Book's 2019 review says all-wheel drive was offered only with the V6 that year. Car and Driver's 2020 review says the new 230-hp 2.0 turbo became standard on the 2LT and 3LT, the 2.5 stayed on the L and LT and those were front-drive only, and the V6 was optional on 2LT and 3LT. In our 2023 decodes the A code stopped returning anything, leaving the turbo and the V6.
For 2025, Car and Driver lists a 228-hp 2.0 turbo as standard and the 308-hp V6 as optional. Then the V6 went away during the 2026 run. GM Authority reported that dealers could not order a 2026 Blazer with the V6 after late May 2026, and that it had been a $1,000 option on the RS only for that year. So a 2026 Blazer with an S in the 8th spot should be an RS, and probably an early build.
A worked example
3GNKBKRS8LS100001 is made up, with a correct check digit and a fake serial, so it will not match a real truck. 3GNKB is a Mexico-built Blazer. K on a 2020 means RS all-wheel drive. R is the fixed 7th character. S is the 3.6 V6. 8 is the check digit, L is 2020 and S is Ramos Arizpe. vPIC returned a 2020 Blazer RS, AWD, 3.6 liters, six cylinders. Now change the year to K for 2019 and fix the check digit: 3GNKBKRSXKS100001 decodes as a Premier AWD instead. Same 6th character, different trim, because the year changed.
Honestly, the V6 is where the money is in these listings. It tows a lot more (GM Authority puts it at 4,500 pounds versus 3,250 for the turbo four on 2026 models), and it was the engine people hunted for once it was gone. If a seller is asking V6 money, the 8th character had better be an S. Our post on reading the 4th through 8th characters covers how GM lays out these codes in general.
After the decode
The VIN cannot tell you if the truck was a rental, sat in a flood, or still has an open recall. Run it through NHTSA's recall search, then go through our Blazer recall check and used Blazer buying guide. If you are also looking at three-row GM crossovers, the Traverse VIN decoder works the same way.
Ownership and title history need a CARFAX or AutoCheck. Ours come through a licensed reseller setup; we are not part of CARFAX, AutoCheck or Experian. Buying one CARFAX direct has been about $39.99 to $44.99, and through us it has mostly been $4.50 to $6.75 depending on how you check out. Prices can shift, so confirm at checkout.

Comments (0)
No comments yet. Be the first to share your thoughts!
Log in to leave a comment.