A Chevy Colorado VIN tells you the trim in the 6th character, two- or four-wheel drive in the 5th, and the engine in the 8th. On 2015 to 2022 trucks, an N in the 8th spot is the 3.6 V6, an A is the 2.5 four-cylinder and a 1 is the 2.8 Duramax diesel. On the redesigned 2023 and later trucks, every one we decoded had a K, the 2.7 turbo four. We tested these patterns in NHTSA's vPIC decoder on November 19, 2026, and the full list is below.
Why bother? Because the diesel and the V6 command real money on the used market, and a "diesel" Colorado with the wrong 8th character is a 2.5 with a nicer story attached to it.
Reading the 2015 to 2022 trucks
The previous-generation Colorado VINs we tested start with 1GCG. The 5th character is the drive: S came back as 4x2 and T as four-wheel drive. The 6th character is the trim, and vPIC returned the same letters for 2018 and 2020:
- A - Base (vPIC gave no trim name for the 4WD version, only the drive)
- B - Work Truck
- C - LT
- D - Z71
- E - ZR2
The 8th character is the engine. A is the 2.5-liter four, N is the 3.6-liter V6 and 1 is the 2.8-liter turbodiesel four. Car and Driver puts those at 200 hp for the four, 308 hp for the V6 and 369 lb-ft of torque for the diesel, which it called the segment's only diesel at the time. The 10th character is the year, so J is 2018 and L is 2020 in the decodes we ran.
One warning from our own testing. vPIC returned a ZR2 with an S in the 5th spot, meaning a two-wheel-drive ZR2. We would not bet a dollar on that truck existing. The decoder is matching characters against GM's published patterns. It does not check what was actually built, so an odd combination is a reason to look closer rather than proof of a rare spec.
Reading the 2023 and later trucks
The current Colorado we tested switched to a 1GCP start, and the trim letters moved around. Here is what came back for 2023:
- B - Work Truck
- C - LT
- D - Z71
- E - Trail Boss
- F - ZR2
So an E means ZR2 on a 2020 but Trail Boss on a 2023. That is exactly the kind of thing that catches people who learned the old codes from a forum post and assume nothing changed. Every 2023 decode came back with K in the 8th spot, the 2.7-liter turbo four. Car and Driver says the V6 and the Duramax diesel were dropped with the redesign, the truck became crew cab only with a 5-foot-2 bed, and the 2.7 runs at 237 hp in WT and LT, 310 hp in Z71 and Trail Boss, and 310 hp with 430 lb-ft in the ZR2. vPIC does not separate those outputs by VIN, so the trim letter is your best clue to which tune you have.
One test VIN, read left to right
We built 1GCGTCEN4L1100001 for testing. Only the check digit is real, so it points at no actual truck. Reading it, 1GC puts it in Chevrolet truck territory, the T in the 5th spot means four-wheel drive, the C in the 6th spot is LT, the N in the 8th spot is the 3.6 V6, the 4 in the 9th spot is the check digit, and the L in the 10th spot makes it a 2020. vPIC returned a 2020 Colorado LT, 4WD, 3.6 liters, six cylinders, gasoline. Change the 8th character to a 1 and the same decode comes back as a 2.8 turbodiesel, which is why that single character is worth checking against the engine bay as well as the ad. A diesel has a very different sound at idle, and the engine cover usually says Duramax. If the VIN says 1 and the truck sounds like a gas V6, something is off, either with the VIN or with the story.
The 9th character deserves a second of your time too. It is a check digit calculated from the rest of the VIN under the federal rules in 49 CFR Part 565, and vPIC will flag it when the math does not work. A failed check digit on a real listing usually means a typo. On a VIN plate, it means you need to look very closely at the rivets and the dash.
Year codes people mix up
Colorado ads often call a truck the wrong year, mostly because dealers list by the date of first sale. The 10th character settles it. In our decodes, J came back as 2018, L as 2020 and P as 2023, and the 2023 truck is a completely different design from the 2022, with a different engine lineup. A "2023 Colorado diesel" does not exist by Car and Driver's account of the redesign, so that listing is either a 2022 or a mistake.
What a VIN decode misses on a used truck
Midsize trucks get worked hard. A decoder will tell you the truck was built as a diesel Z71, but it cannot tell you it towed a camper for 90,000 miles or sat in a flooded lot after a hurricane. It also cannot see a title brand from another state. We have seen Colorado listings with a clean-looking photo set and a salvage brand two states back, and the only way to catch that is a history report and a real inspection. The recalls on this truck are worth a look too, and our Colorado recall check goes through them year by year.
So the order we would use is simple. Match the VIN on the dash, the door jamb and the title. Run it through the free vPIC decoder and confirm the 5th, 6th and 8th characters against the ad. Then check NHTSA's recall lookup, which is free and takes seconds. If the spec holds up, buy a report before you drive two hours to see it.
Speaking of which, we sell CARFAX and AutoCheck reports as a licensed reseller, and we are not affiliated with either company or with Experian. Buying one CARFAX straight from the source has run roughly $39.99 to $44.99 lately. Our guest, member and bundle prices have been landing around $4.50 to $6.75 per report, but prices shift, so confirm at checkout before you count on a number. The Chevrolet VIN decoder post covers the GM codes we did not get into here, and the used Colorado buying guide covers the mechanical stuff by generation.

Comments (0)
No comments yet. Be the first to share your thoughts!
Log in to leave a comment.