⚡ Limited Time: Get your Carfax and Autocheck for $4.50 when you sign up! - instant delivery
CheapCarfaxAutocheck
Pricing Membership FAQ Support Blog
← All articles / Buying Guides
Buying Guides November 22, 2026 · 6 min read

Chevy Impala VIN Decoder: Trim, Engine and Plant

A D meant SS on a 2008 Impala and Police Cruizer on a 2013. The codes, tested in NHTSA vPIC.

CE
CheapCarfaxAutocheck Editorial Team
Vehicle History Research Team
Chevy Impala VIN Decoder: Trim, Engine and Plant

To decode a Chevy Impala VIN, read the 5th character for the trim and the 8th for the engine, then use the 11th to see where it was built. On a 2014-2020 Impala, an A in the 8th spot is the 2.5-liter four-cylinder and a 3 is the 3.6-liter V6. On a 2006-2013 car, the 5th character separates LS, LT, LTZ, SS and the police sedan. Be careful, though, because the same letter changed meaning between generations. I ran test VINs for the 2005, 2008, 2013, 2015 and 2017 Impala through NHTSA's vPIC decoder on November 22, 2026, and a D went from SS on the 2008 to "Police Cruizer" on the 2013.

The 2006-2013 cars: 2G1W and a trim letter

Most used Impalas out there are from this run, and their VINs start 2G1W. On my 2008 test VINs, the 5th character decoded like this: B was LS, T was 1LT, C was 2LT, U was LTZ, D was SS and S was the police sedan (listed with the 9C1 and 9C3 order codes). The engine sits in the 8th position: K and N both came back as a 3.5-liter V6, 1 and 3 as a 3.9-liter V6, and C as a 5.3-liter V8.

That last one matters if someone is selling you an SS. When I paired the SS letter with K, vPIC still returned "SS, 3.5-liter V6" without complaint, because it decodes each position separately. A real SS VIN should carry the V8 code. If the VIN on an "SS" shows a V6 engine character, you are looking at a badge job, a typo or a VIN that came off another car. The plant on all of these was listed as Oshawa #1, matching a 9 in the 11th spot.

By 2013 the 3.6-liter V6 had replaced the older engines, and my 2013 test VINs used a 3 in the 8th position for it. The trim letters shifted too: A was LS, B was LT, C was LTZ, D was the police car and G was LT Fleet. A 1 in the 11th position decoded as Oshawa #2. So on a 2013, B means LT. On a 2008, B means LS. Same letter, different car.

Get articles like this every week
Field guides, red flags, and the occasional discount.

The Impala Limited, 2014-2016

vPIC treats 2014-2016 cars with the older 2G1W layout as a separate model called the Impala Limited. My 2015 test VIN in that format came back as "Impala Limited," with A as LS Fleet, B as LT Fleet and C as LTZ Fleet, all with the 3.6-liter V6 and built at Oshawa #2. In other words, a 2015 whose VIN starts 2G1W decodes like the 2013 car, not like the 2017. If an ad calls it the newer Impala and the VIN says Limited, ask the seller which one it really is before you talk money.

The 2014-2020 cars: different layout entirely

The tenth-generation Impala dropped the W. My 2017 test VINs looked like 2G1105S3 or 1G1105S3 up front. Here the 5th character carried the trim: Z was LS (1LS), X was LS (1FL), 0 was LT (1LT), 1 was LT (2LT), 3 was LTZ (1LZ), and Y and 2 came back with CNG in the label. The 8th character split the engines: A decoded as a 2.5-liter four-cylinder and 3 as a 3.6-liter V6. Car and Driver's Impala review lists the same pair, a 197-hp 2.5-liter four and a 305-hp 3.6-liter V6, both with a six-speed automatic and front-wheel drive only.

The plant is where these get interesting. When I put a U in the 11th position, vPIC returned Detroit Hamtramck. With a 9, it said Oshawa #1, even on a VIN that started 1G1. So read the 11th character for the plant and do not guess it from the first digit. Our guide to the 11th digit explains that position.

2000-2005: the older cars

On a 2005 test VIN, the 5th character gave F as the base car with no trim listed, H as LS and P as SS. The 8th character returned E as a 3.4-liter V6, J as a 3.1-liter V6, and K or 1 as a 3.8-liter V6. When I tried an M, vPIC called it a 1.4-liter four-cylinder, which is nonsense for an Impala of that era. It is a good example of why a decode that "works" is no proof the VIN is real.

Reading one VIN start to finish

Here is a 2008 test VIN read left to right: 2G1WD58C389123456. The 2G1 prefix goes with the Canadian build vPIC reported (Oshawa), and W is the letter all of my 2000-2015 test VINs shared. D in the 5th spot is SS on a 2008. I left the 6th and 7th characters (5 and 8) alone in my 2008 tests, so I cannot tell you what other values there would mean. C in the 8th is the 5.3-liter V8, 3 is the check digit, 8 is 2008, 9 is Oshawa #1, and 123456 is a serial I invented. Put together, that is a 2008 Impala SS with the V8, which is what you would hope to see on a car advertised as an SS. Swap that C for a K and the decoder still says SS, just with a V6, so the 8th character is the one to stare at.

Find the VIN in two places before you trust it: on the dashboard where it meets the windshield, readable from outside, and on the label inside the driver door opening. Both should match the title and the registration. A mismatch on a cheap sedan is worth walking away over, no matter how nice the interior looks.

Watch for former police cars

The police codes are worth knowing because retired cruisers get resold cheap, often after years of idling and hard miles. If the 5th character comes back as the police sedan on a 2008, or as Police Cruizer on a 2013, ask for the service records and read our post on buying a former police car. Fleet trims like LT Fleet may point to rental or company use, which a history report usually flags as well.

After the decode

My test VINs used made-up serial numbers with valid check digits, so they show what a configuration decodes to, not a real car's history. Put the real VIN from the dash and door jamb into NHTSA's vPIC decoder, compare it with the title, then check for open campaigns with our Chevy Impala recall check. The used Impala buying guide covers the common problems.

The decoder will not tell you about the wreck, the flood brand or the rolled-back odometer. A CARFAX or AutoCheck report will tell you most of it. We resell both under license, and CARFAX, AutoCheck and Experian have nothing to do with us beyond that. Retail from the source is typically $39.99 to $44.99 a report; ours costs less, but it gets updated, so confirm at checkout. On a $6,000 sedan, skipping the report to save a few bucks is how people end up owning somebody else's insurance loss.

Sources

Run a report
Don't buy without checking the VIN
Carfax + AutoCheck from $4.50 · Instant · 60 seconds
Run a report →