On a 2015 to 2024 Ford Edge, three VIN characters answer most buyer questions: the 6th tells you the drive (3 for front-wheel drive, 4 for all-wheel drive), the 7th gives the trim (G for SE, J for SEL, K for Titanium, A for Sport or ST), and the 8th gives the engine (9 for the 2.0 EcoBoost four, P for the 2.7 twin-turbo V6, 8 for the older 3.5 V6). We ran test VINs for 2015, 2019, 2020, 2021, 2022, 2023 and 2024 through NHTSA's vPIC decoder on November 19, 2026, and that is where these codes come from. The reason to bother is simple. A used Edge ST and a used Edge SEL with an ST-style grille can look close in photos, and the price gap between them is real money.
If a listing says "Edge ST" and the 8th character is a 9, something is off. The ST was sold with the 2.7 V6, and Car and Driver's 2019 review says it came exclusively with the twin-turbo V6 and standard all-wheel drive.
Where the VIN is and what the first five characters mean
Every second-generation Edge VIN we decoded starts with 2FMPK. The 2 means the vehicle was built in Canada, and vPIC lists the plant as Oakville, Ontario, which matches the B we saw in the 11th spot on every test VIN. Read the VIN off the dash plate through the windshield and off the sticker in the driver door jamb, then compare both to the title. The 10th character is the model year under the federal layout in 49 CFR Part 565: the Edges we tested ran F (2015), K (2019), L (2020), M (2021), N (2022), P (2023) and R (2024). Our model-year digit guide has the full year table if you are looking at something older.
The 6th character: front-wheel or all-wheel drive
This one is easy and it matters for resale. A 3 decoded as front-wheel drive and a 4 as all-wheel drive on every year we tried up to 2021. For 2022, 2023 and 2024, vPIC would not decode a single VIN with a 3 in that spot, while the 4 versions decoded fine. That lines up with Ford Authority's August 2021 report that the 2022 Edge lineup went all-wheel drive only. So if someone is selling a "2023 Edge FWD" with a 3 in the 6th spot, that VIN is either mistyped or it is a problem. A VIN in an ad that is one character off from the dash plate is sloppy at best, and it is worth a question either way.
The 7th character: trim
vPIC returned these trims for our test VINs:
- G - SE, the base model
- J - SEL, the volume trim you will see most on used lots
- K - Titanium
- A - Sport on the 2015 VIN, ST on 2019 and later
The A is the one that confuses people. Car and Driver says the Sport model was dropped for 2019 and the new Edge ST took its place, so an A on a 2015 to 2018 Edge means Sport and an A on a 2019 to 2024 Edge means ST. Same letter, different car. We did not decode a 2016 to 2018 or a separate ST-Line package, so if a seller calls a car "ST-Line," check the window sticker rather than trusting the VIN to say so.
The 8th character: engine
On the second-generation Edge we saw three engine codes. 9 is the 2.0-liter turbocharged four. P is the 2.7-liter twin-turbo V6. 8 decoded as a 3.5-liter V6 on our 2015 test VIN. Car and Driver lists the 2019 ST at 335 hp from that 2.7, and all 2019 Edges got an eight-speed automatic as standard per the same review.
Now the annoying part. vPIC will hand you an ST with a 2.0 engine and front-wheel drive, which Ford never sold according to the review above. The decoder matches patterns. It does not know which combinations were real. We wrote a whole post on why a decoder can show the wrong trim, and the Edge is a good example. When you see a strange combo, look closer at the car, the build sticker and the title before you believe you found a rare factory build.
Reading one VIN start to finish
Take 2FMPK4J98KB100001. We made that VIN up for testing, and only the check digit is real math. 2FMPK puts it in the Canadian-built Edge family. The 4 in the 6th spot is all-wheel drive. The J is SEL. The 9 in the 8th spot is the 2.0 turbo. The 8 in the 9th spot is the check digit, which our check digit explainer shows how to verify by hand. The K is 2019 and the B is Oakville. vPIC returned exactly that: 2019 Edge SEL, AWD, 2.0 liter, four cylinders, turbo. Swap the J for an A and the same decoder says ST, still with the four-cylinder, which is the mismatch trap from above. Do not go looking for this car. The serial 100001 is fake.
Older Edges and what the decoder misses
First-generation Edges use a different pattern. Our 2011 test VINs started with 2FMDK, used the same 3 and 4 for drive, G for SE, J for SEL, K for Limited and A for Sport, and every one decoded with a C in the 8th spot as a 3.5 V6. We did not test other first-gen engine codes, so we will not guess at them here.
The bigger gap is history. vPIC tells you what left Oakville. It cannot see a salvage brand, an accident, an odometer problem or skipped recall work. Ford ended North American Edge production on April 26, 2024, per Autoblog's report on the Unifor announcement, and Ford Authority put the total at 2,609,545 Edges built from 2007 to 2024. That is a lot of cars in the used market, and a lot of them are now on their second or third owner. Before you pay, run the VIN through NHTSA's recall lookup and read our Ford Edge recall check, then the used Edge buying guide.
For ownership and title history, a CARFAX or AutoCheck report is the next step. We resell both under a licensed arrangement and are not affiliated with CARFAX, AutoCheck or Experian. Buying a single CARFAX direct has been running about $39.99 to $44.99, and ours has been landing between roughly $4.50 and $6.75 depending on whether you check out as a guest, a member or with the bundle. Prices may change, so confirm at checkout before you assume a number from any blog post, including this one.
Sources
- NHTSA vPIC VIN decoder
- vPIC decode of a 2019 Edge SEL AWD test VIN (made-up serial, valid check digit)
- Car and Driver, 2019 Ford Edge review
- Ford Authority, 2022 Edge lineup goes all-wheel drive only
- Autoblog, final U.S.-market Ford Edge built April 26
- Ford Authority, last North American Ford Edge
- eCFR 49 CFR Part 565, VIN requirements

Comments (0)
No comments yet. Be the first to share your thoughts!
Log in to leave a comment.