⚡ Limited Time: Get your Carfax and Autocheck for $4.50 when you sign up! - instant delivery
CheapCarfaxAutocheck
Pricing Membership FAQ Support Blog
← All articles / Buying Guides
Buying Guides November 18, 2026 · 6 min read

IAA Start Codes: Run and Drive vs Starts vs Stationary

Stationary can mean a blown engine or a car nobody tried to start. Here is what each IAA start code really tells you.

CE
CheapCarfaxAutocheck Editorial Team
Vehicle History Research Team
IAA Start Codes: Run and Drive vs Starts vs Stationary

IAA lists one of three start codes on every vehicle: Run and Drive, Starts, or Stationary. Run and Drive means that when the car checked in, the engine fired, it went into forward and reverse, and the steering wheel turned a full rotation each way. Starts means it fired and idled, nothing more. Stationary means it would not start, has engine damage, or nobody tested it. None of the three is a promise about the car on the day you pick it up, and IAA's auction rules say so in capital letters.

We read IAA's Vehicle Start Codes page and its full Auction Rules on November 18, 2026, because the short labels on a listing hide most of what matters. If you are new to salvage auctions, the gap between "Starts" and "runs fine" is where a lot of first-time money disappears. Our IAA buying checklist covers the whole process; this post is only about the start codes.

Run and Drive: what IAA actually checked

IAA's rules define Run and Drive narrowly. At check-in, the engine started, with or without a jump, both forward and reverse gears engaged, and from a standing start the steering wheel turned one full turn right and one full turn left. That is the whole test. Nothing in the definition says the car drove across the lot, held a gear under load, stopped straight, or passed any inspection. A car with a slipping transmission or a wheel bearing on its last legs can earn the label.

Copart's version of the badge is a little different. Its member guide says Copart verified the vehicle started, could be put in gear, and could move forward under its own power. IAA's wording talks about gears engaging and the wheel turning, and does not mention the vehicle moving. If you shop both yards, do not assume the two badges mean the same thing. We broke down the Copart side in what Copart's Run and Drive label means.

Get articles like this every week
Field guides, red flags, and the occasional discount.

Starts: a running engine, and that is all

Starts means that on arrival the motor fired, jumped or not, and settled into an idle. IAA adds that the vehicle may not start, drive or move forward at pickup and may not be roadworthy. In the Auction Rules it is the "Y" under the Starts column. So a Starts car may have a dead transmission, a broken axle or a steering problem, and the code would still be accurate. It only tells you the engine is not seized, which on a wreck is useful but not much more.

Stationary: the code that hides the most

Stationary covers three very different situations: the vehicle will not start, it has engine damage, or it was not tested on arrival. IAA lumps them together. A flood car with a hydrolocked engine and a clean commuter car that arrived without a key can both say Stationary. That is why Stationary lots sometimes go cheap and sometimes do not. Experienced bidders are pricing which of the three they think it is, usually from the photos, the damage type and whether the keys are listed as present. Look at the dash photo too. A cluster lit up with warning lights tells you the battery at least had power when the photographer was there.

If you are looking at a Stationary lot, the photos, the damage notes and the history matter more than the code. Our post on buying a salvage auction car with no keys gets into the key problem specifically.

The fine print behind every code

IAA's start codes page says the status is set when the vehicle arrives at the branch and is not a representation that it will keep doing it, or that it is roadworthy. The Auction Rules go further. Every vehicle is sold as is, where is, with no warranty. IAA may offer engine run videos but is not required to have one on Run and Drive lots, and providing one is not a warranty about the engine. The rules also say a vehicle with a clear title may still have a salvage history, which is worth reading twice.

Cars sit, too. A car that started at check-in can have a flat battery or a mouse nest by sale day. IAA's 10-second Engine Starts videos help, but they show an engine idling, not a car moving. So treat "it was Run and Drive" as a starting point for questions. It does not settle anything on its own.

Money and timing once you win

Whatever the code, IAA wants payment within three business days, counting the auction day plus two business days, so a Monday sale is due by close of business Wednesday. Late payment costs $50 or 2 percent of the sale price, whichever is more. Pickup has to happen within the time the branch allows, or storage fees start per day, and risk of loss passes to you the moment the vehicle is awarded. If you pay and do not pick up within 30 calendar days, IAA can charge a cancellation fee. A Stationary car also means you need a trailer or a tow, so price that in before you bid.

Check the history before the code fools you

A start code tells you about the engine on one day. A history report tells you about the car's whole life: the prior salvage auction, the flood brand in another state, the odometer readings that stop making sense. Our guide to checking IAA vehicle history before bidding covers what to look for, and IAA announcement codes explains the other labels on the listing. You can also search the VIN in the federal NMVTIS system for title brands.

We sell real CARFAX and AutoCheck reports as a licensed reseller, independent of CARFAX, AutoCheck and Experian. Recently that has been around $4.50 per report for members, $5.50 without an account, and roughly $6.75 for both on one VIN. A single report on the CARFAX site is $39.99 to $44.99. We adjust pricing often, so confirm at checkout before you bid on three Stationary cars in a row.

Sources

Run a report
Don't buy without checking the VIN
Carfax + AutoCheck from $4.50 · Instant · 60 seconds
Run a report →