To decode a 2021-or-newer Jeep Grand Cherokee VIN, read positions 5, 6 and 7 as one code: JG plus a trim letter is a two-row 2WD, JH is two-row 4WD, JJ and JK are the three-row Grand Cherokee L, and on the 2024 chart JY is the 4xe plug-in. Position 8 is the engine, and it has changed more than people expect: G is the 3.6-liter V6 on every chart we read, 6 was the 4xe's 2.0-liter turbo hybrid, T was the 5.7 V8 on the 2024 Grand Cherokee L, and the 2027 chart adds R for a 2.0-liter turbo four rated at 324 hp.
We read two FCA US filings from NHTSA's vPIC library on November 9, 2026: the 2024 Truck and MPV VIN code guide dated July 12, 2024, and the 2027 guide FCA updated on October 28, 2026, which its cover letter says adds one series name to the Grand Cherokee. Both cover the current generation, which FCA labels WL. FCA's own recall letters use the WL label for 2022-and-newer two-row trucks and 2021-and-newer Grand Cherokee L models. If yours is a 2021 two-row or older, it is the previous generation with different codes, and our Jeep VIN decoder and WK Grand Cherokee guide are the better starting points.
Positions 1 to 4: maker, type and the safety slot
1C4 is FCA US LLC, multipurpose passenger vehicle, on both charts. Position 4 is not the model on a Jeep. It is a combined code for brake system, GVWR range and restraint setup. The 2027 Grand Cherokee page lists a single value, R, for hydraulic brakes, a GVWR of 6,001 to 7,000 pounds, and active belts, airbags and side bags in all rows. That is easy to mix up with the R that means 2024 at position 10, so read the positions, not the letters.
Positions 5 to 7 on the 2024 chart
For the two-row Grand Cherokee, the 2WD codes run JGA Laredo, JGB Limited, JGD Overland and JGE Summit, and the 4WD versions swap G for H: JHA, JHB, JHD, JHE. The chart also lists right-hand-drive codes (JGJ, JHJ, JHK, JHM, JHN), and if you ever run into one of those codes on a US listing, go look at which side the steering wheel is on before anything else. The plug-in rows are all 4WD: JYB 4xe, JYC Trailhawk 4xe, JYD Overland 4xe and JYE Summit 4xe, with JYK through JYN for the right-hand-drive PHEVs.
The three-row Grand Cherokee L uses JJ for 2WD and JK for 4WD with the same trailing letters: A Laredo, B Limited, D Overland, E Summit. So JHB and JKB are both Limited 4WD, one with two rows and one with three. If a seller lists a Grand Cherokee L and position 6 is H, it is the two-row truck, full stop.
Positions 5 to 7 on the 2027 chart
The 2027 page is shorter and shuffles the names. JGA and JHA now cover Base, Laredo and Limited Classic in one code. JGB and JHB stay Limited. JHC appears as a gas Trailhawk, 4WD only, and JHD and JHE remain Overland and Summit. The L keeps JJA, JKA, JJB and JKB, while Overland (JKD) and Summit (JKE) are 4WD only. We found no JY plug-in rows and no right-hand-drive rows on the 2027 Grand Cherokee page. That matters if you are cross-shopping a leftover 2027 against a used 2024 4xe, because the VIN on a 2027 has no way to say plug-in.
The practical trap: a Trailhawk on the 2024 chart only exists as a 4xe (JYC). On 2027 it is JHC with a gas engine. A 2024 listing that says Trailhawk with an H at position 6 is describing a truck the 2024 chart does not have.
Position 8: the engine letter
On the 2024 chart, the Grand Cherokee row shows two engines: 6, the 2.0-liter turbo plug-in hybrid at 375 hp, and G, the 3.6-liter V6 at 293 hp. The Grand Cherokee L row shows G at 293 hp and T, the 5.7-liter V8, at 357 hp. The 2027 page lists R, a 2.0-liter turbo inline-four at 324 hp, and G at 293 hp. No V8 and no plug-in show up for 2027. So a 2027 with T at position 8, or a two-row 2024 with T, is a VIN worth questioning.
Positions 9 to 17 and a worked example
Position 9 is the check digit, calculated under 49 CFR Part 565. Position 10 is the year, R for 2024 and V for 2027 on these charts. Position 11 is the plant; the 2027 Grand Cherokee page lists C for Jefferson North Assembly and 8 for Mack Assembly, both in Detroit. Positions 12 to 17 are the plant sequence number.
Say you see 1C4RJKBG, a check digit, then R8. That reads as an FCA US MPV, three-row Grand Cherokee L, Limited 4WD, 3.6 V6, 2024, Mack Assembly. If the listing says Summit, position 7 should be E. If it says Hemi, position 8 should be T. Run it through NHTSA's free vPIC decoder and see whether it agrees, and if a site shows a different trim, our wrong-trim guide explains why that happens.
What the decode does not cover
The VIN tells you how the Jeep was built. It does not say whether recalls are done, and this generation has a long list. NHTSA's 2022 Grand Cherokee recall list includes rear coil spring campaigns, the most recent being 26V-562, filed September 1, 2026, which covers 2021 to 2023 Grand Cherokee L, 2022 to 2023 Grand Cherokee and Grand Cherokee 4xe models. 4xe owners also have battery campaigns, which our 4xe battery fire recall guide covers. Check the exact VIN with our Jeep recall lookup and read the used Grand Cherokee buying guide before an inspection.
Accidents, title brands and mileage problems live in a history report. CARFAX's own single-report price tends to land between $39.99 and $44.99. CarVins sells both reports as a licensed reseller and has no tie to CARFAX, AutoCheck or Experian. Lately a guest report has run about $5.50, $4.50 if you are a member, and $6.75 for both together, but that moves, so confirm at checkout. Pull it from the VIN plate on the dash yourself. A PDF from the seller proves nothing.
Sources
- FCA US 2024 Truck/MPV VIN code guide, July 12, 2024 (NHTSA vPIC)
- FCA US 2027 VIN code guide, Grand Cherokee update, October 28, 2026 (NHTSA vPIC)
- NHTSA recall data for the 2022 Jeep Grand Cherokee
- 49 CFR 565.15: VIN content and check digit
- FCA interim owner letter for recall 26V-562 (89D), naming the WL Grand Cherokee and Grand Cherokee L
- NHTSA vPIC VIN decoder


Comments (0)
No comments yet. Be the first to share your thoughts!
Log in to leave a comment.