On a 2014-2021 Mazda6 VIN, the 7th character is the trim and the 8th is the engine. For 2018-2021 cars, U is Sport, V is Touring, T is Grand Touring, W is Grand Touring Reserve and X is Signature, and a Y in 8th place means the 2.5 turbo. The catch is that the same letters meant different trims on 2014-2017 cars, so a T or an X on an older 6 is not what it is on a newer one. We confirmed all of this by running batches of Mazda6 VINs through NHTSA's vPIC decoder in November 2026.
The Mazda6 is a used-car sweet spot right now. Car and Driver reported that Mazda would not bring the 6 back for 2022, so every one on the lot is used, and the turbo cars and Signature trims carry real premiums. That is why the VIN matters. Turbo badges cost nothing online and a lot of 6s look alike from the outside.
Reading the first half of the VIN
A typical Mazda6 VIN starts JM1, Mazda's code for passenger cars built in Japan. The 4th and 5th characters tell you the generation in practice:
- GJ: 2014-2017 cars in our samples (we ran 2014 and 2016).
- GL: 2018-2021 cars, the facelift with the turbo option.
The 6th character was a 1 on every sedan we ran. vPIC listed Hofu as the plant on most decodes, though some 2018 cars came back as Yamaguchi, which is the prefecture Hofu sits in, so do not read anything into that difference.
The 7th character: trim, and why the year matters
On 2018-2021 cars, vPIC returned the same codes for 2018 and 2021:
- U: Sport
- V: Touring
- T: Grand Touring
- W: Grand Touring Reserve
- X: Signature
- S: came back "not identified"
On 2014-2017 cars the letters shift. U was Sport, V was Touring, W was Grand Touring, T was "Touring Technology Package" and X was SE. So an older 6 with a W in 7th place is a Grand Touring, while a 2018 with a W is a Grand Touring Reserve. And an X on a 2014 is an SE, not a Signature. If you are using a code list you found on a forum, make sure it matches the year, because this is exactly the kind of thing that gets copied wrong.
The 2014 decodes also mixed in names like "Sky-D" and "GS" and "GX" with the US trim names, like "Touring/Sky-D/GS". Those come from other markets in vPIC's table. Ignore them and use the first name in the list. By 2016 the names had been tidied up a bit, with V decoding as "Touring/GS" and W as "Grand Touring/GT," and the 2.2 diesel code no longer showed up in our 2016 results at all.
The 8th character: engine and the turbo
This is the money character on 2018-2021 cars. vPIC returned:
- 5: 2.5-liter, listed at 184 hp.
- M: 2.5-liter, listed at 187 hp.
- Y: 2.5-liter turbo, listed at 227 hp, with the turbo flag set.
Car and Driver lists the standard engine at 187 hp and says the turbo "generates up to 250 horsepower," so vPIC's horsepower field is not the last word. What matters is the Y. A 6 sold as a turbo that does not have a Y in 8th place is not a turbo. One warning, though. vPIC decodes each character on its own, so it will happily return a turbo for a Sport or Touring VIN if there is a Y in 8th place. A decode alone does not prove that combination was ever built, so if a cheaper trim shows a Y, compare the VIN on the dash and door jamb with the title before you believe it.
On the 2014-2017 cars, 5 and 6 both decoded as 2.5-liter engines. A 2 came back as a 2.2-liter diesel, with "Sky-D" in the trim field. If your gas Mazda6 decodes as a 2.2 diesel, recheck the VIN against the dash plate and the door jamb label before you go any further.
On 2018-2021 cars, 5 and M are both non-turbo 2.5-liter engines. vPIC lists them at 184 and 187 hp and does not explain the split, so treat either one as the standard engine. Neither one is a turbo, whatever the ad says.
Checking a listing before you drive out
Here is the quick routine. Read the VIN through the windshield and off the door jamb sticker, and make sure both match the title. Paste it into vPIC. Check the 4th and 5th characters for GJ or GL so you know which code list applies, then the 7th for the trim the seller claims and the 8th for the engine. Then check the 10th for the model year. If the ad says "2019 Signature turbo," you want GL, X, Y and K. Anything else, ask why. Usually it is a seller guessing at the trim. Sometimes it is a Touring with Signature wheels and a Signature price.
A sample decode
Take JM1GL1VM5J1000000. vPIC returned a 2018 Mazda6 Touring sedan with a 2.5-liter, 187 hp. GL is the facelift generation, V is Touring, M is the non-turbo 2.5, 5 is the check digit and J is 2018. Our 10th digit year chart covers the year letters, and our Mazda VIN decoder covers the rest of the lineup.
What the VIN cannot tell you
The VIN does not show options like the premium Bose stereo or the color, and it says nothing about the car's history. A cheap 6 with a fresh paint job could be a rebuilt wreck. Check open campaigns with our Mazda6 recall guide, and read the used Mazda6 buying guide before you test drive.
For accidents, title brands and odometer problems, you need a history report. We are a licensed CARFAX and AutoCheck reseller, not affiliated with CARFAX, AutoCheck or Experian. Our reports have run about $5.50 as a guest and $4.50 for members, against roughly $39.99-$44.99 retail. Prices move, so confirm at checkout.
Run your own decode
Paste any VIN into NHTSA's vPIC decoder for free, or look at the raw output for our 2018 Touring sample. The federal VIN rules are in 49 CFR Part 565.

Comments (0)
No comments yet. Be the first to share your thoughts!
Log in to leave a comment.