When NHTSA's free vPIC VIN decoder returns an error code, the short version is this: 0 means the VIN decoded clean, 1 means the check digit in position 9 does not add up, 6 means the VIN is incomplete, 8 means NHTSA has no detailed data for that pattern, 11 means the model year character is invalid, and 400 means there is a character that is never allowed in a VIN, like the letter O. A code 1 or 400 on a seller's VIN is the one to take seriously. We triggered each of these ourselves in vPIC on November 18, 2026, using made-up VINs.
The annoying part is that vPIC often still fills in a make, model and trim even when it flags an error. So a buyer sees "2019 GMC Acadia SLE 1" on the screen, feels reassured, and never notices the red text above it. That is how a mistyped or invented VIN slips through, and then the history report you buy describes a car you are not looking at.
Why the check digit catches so much
Federal rules in 49 CFR Part 565 say every VIN has 17 characters and that a check digit sits in position 9. That digit is calculated from the other 16, so most single-character typos and most VINs that someone made up by hand fail it. Our check digit explainer walks through the math. vPIC runs that test every time, which is why its error codes are useful even if you never read the rest of the decode.
The codes we saw, and what to do
- 0, VIN decoded clean. The check digit is correct and vPIC found the pattern. This is what you want, but it only proves the VIN is well-formed. It says nothing about the car's history, and it does not prove the VIN on the paperwork matches the car.
- 1, check digit does not calculate properly. One character is wrong somewhere. Our test VIN with a bad 9th digit still decoded as a 2019 Acadia SLE 1, which is exactly why people miss it. Recheck the VIN on the car itself. If the car's own plate fails too, walk away or get a professional to look.
- 4, VIN corrected, error in one position. vPIC thinks one character is off and shows a suggested VIN with an exclamation mark where the problem is, plus the allowed values for that spot. Ours came back with position 8 and the possible values A, C, J and S. Useful for spotting a typo, but confirm it against the car.
- 6, incomplete VIN. Fewer than 17 characters. A 16-character entry of ours still decoded to a full Acadia description, so do not let that fool you.
- 7, manufacturer not registered with NHTSA for sale or import in the U.S. You will see this on a VIN whose first characters do not belong to any registered maker. On a real car that can point to a gray-market import, and our 25-year import checklist covers that. On an ordinary used Honda, it points to a fake or a typo.
- 8, no detailed data available currently. vPIC recognized the maker and year but not the rest. In our tests it showed up when a character in the model section did not match anything the maker had filed with NHTSA, including on a Nissan pattern with one wrong letter. Our GMC test returned only "GMC" and "2019" and nothing else.
- 11, incorrect model year. Position 10 holds a character vPIC does not accept for a model year. The error text lists I, O, Q, U, Z and 0 as invalid there. vPIC adds that decoded data may not be accurate, and it means it.
- 14, unable to provide information for some characters. The manufacturer's submission to NHTSA does not cover every position, so vPIC tells you which positions it could not use. Often harmless, but it means the trim or engine shown may be a guess.
- 400, invalid characters present. The VIN contains a character that is not allowed. vPIC tells you which position, and in our test it flagged an O typed in place of a zero. We would look first for an O or an I typed where a zero or a one belongs.
Codes stack. vPIC shows them as a list like "1,400" or "1,7,11,400," and a VIN with three or four codes at once is very likely made up or badly mangled, and we would not spend money on a report for it until the seller sends a photo of the windshield plate.
The quirk that surprised us
We pasted an 18-character string, a valid VIN with one extra digit on the end, and vPIC returned code 0, decoded clean. So a clean result does not prove the number you copied from an ad is exactly right. Count the characters yourself. Then compare the VIN on the windshield plate, the door-jamb sticker and the title, because a VIN can decode perfectly and still belong to a different car. Our guides on spotting a cloned VIN and on what to do when a decoder shows the wrong trim pick up from there.
What vPIC will not tell you
vPIC is a decoder. It reads the factory pattern of the VIN and stops there. It will not show accidents, title brands, odometer problems or theft. For theft and insurance total loss records, run the VIN through NICB VINCheck, and for open recalls use NHTSA's recall lookup. Our guide to decoding a VIN covers what each position means if you want the long version.
For the history itself, we sell CARFAX and AutoCheck reports through a reseller license, separate from CARFAX, AutoCheck and Experian. This November a single report has been about $5.50 for guests and $4.50 for members, with both together near $6.75, where a CARFAX from CARFAX typically costs $39.99 to $44.99. Promos change it, so confirm at checkout. And if a "free VIN check" site shows you a clean decode and then asks for a card to see the "full report," you have already seen most of what it has. The decode was free from NHTSA all along.

Comments (0)
No comments yet. Be the first to share your thoughts!
Log in to leave a comment.