A current Toyota Sequoia VIN starts with 7SV, and digits 4 through 8 tell you one main thing: AAAAA is the two-wheel-drive 80 Series and AAABA is the four-wheel-drive 85 Series, both with the 3.4L twin-turbo hybrid V6. The 10th digit is the model year, the 11th is the San Antonio plant code X, and the trim (SR5, Limited, TRD Pro and so on) is not in the VIN at all. That last part trips up a lot of shoppers comparing listings.
We pulled Toyota's own VIN coding charts from NHTSA's manufacturer filings on November 21, 2026, then ran test VINs through NHTSA's free decoder to make sure the codes behave the way the charts say. Here is what each position means on the newer trucks, and where a seller listing can mislead you.
Positions 1-3: the 7SV prefix
The first three characters are the world manufacturer identifier, and on the Sequoia that is 7SV. Toyota's chart defines it as Toyota Motor Manufacturing, Texas, Inc., North America, USA, for a multipurpose passenger vehicle. So a Sequoia built for the US market in the current generation should start 7SV. If you are looking at one that starts with a J, or with the 5TD prefix you see on other Toyota SUVs, stop and ask why. It may be an older Sequoia from a different plant, or the paperwork may belong to a different vehicle. Either way it deserves a second look before money moves. Read the VIN off the base of the windshield and the driver door label yourself rather than copying it from the ad, since a typo there sends every lookup after it in the wrong direction.
Federal rules in 49 CFR Part 565 require every maker to file this kind of chart with NHTSA, and that is why we can quote the codes instead of guessing from forum posts.
Positions 4-8: really just a drive code
Toyota packs the vehicle description into a five-character block, and on the Sequoia the block barely changes. In the 2026 model year chart there are only two rows. AAAAA is a standard-roof five-door with the V35A-FTS engine, gasoline hybrid, port plus direct injection, 3.4L V6 rated at 389 horsepower, the 1TM motor, 80 Series two-wheel drive, GVWR Class F (7,001 to 8,000 lbs). AAABA is identical except it is the 85 Series with four-wheel drive. The 2025 chart, filed with NHTSA in May 2024, shows the same two codes.
The fourth character of that block, the B versus A, is what you are really reading. If a listing says 4x4 and the VIN has AAAAA, the listing is wrong or the VIN is. We ran a made-up 2024 VIN with AAAAA through the NHTSA decoder this morning and it came back as 80 Series, 4x2. A 2023 VIN with AAABA came back as 85 Series, 4WD, with the 3.4L V6 flagged as a hybrid. So the pattern also holds on the earlier trucks we tested, even though the newest charts we read cover 2025 onward.
One small surprise: the 2027 chart, filed in October 2026, lists only AAABA. No two-wheel-drive row. If you see a 2027 Sequoia with AAAAA on a listing, check it twice.
The restraint category in Toyota's chart is 1 on both rows, which it defines as seat belts at all seats, front air bags for driver and passenger, curtain shield air bags for all three rows, first-row side air bags and knee air bags for both front seats. That is useful if a body shop invoice mentions curtain air bags and you want to confirm the truck was built with them.
Position 9: the check digit
The ninth character is calculated from the other sixteen. If one character in a VIN has been mistyped, or deliberately changed, the math usually stops working and decoders throw an error. Our guide to the VIN check digit walks through the formula. On a Sequoia, a VIN that fails the check is a reason to look at the dash plate and the door label in person, because scammers do sometimes edit one character of a real VIN in an ad.
Positions 10-17: year, plant and serial
The 10th character is the model year. Toyota's 2026 chart uses T, and the decoder read P as 2023 and R as 2024 when we tested. Our post on the 10th digit has the full letter table, which skips I, O, Q, U, Z and zero. The 11th character is the plant. On these charts it is X, Toyota Motor Manufacturing, Texas, and NHTSA's decoder lists the plant city as San Antonio. The last six characters are the sequential production number.
Where the VIN stops being useful
Look, the Sequoia VIN will tell you drive type and model year and not much else. It will not tell you whether a truck is a Platinum or a Capstone, whether it has the TRD Pro package, or what options were added at port. That gap is where sellers stretch, because nothing in the 17 characters can prove a listing's trim claim one way or the other. A 4WD truck with aftermarket wheels can be sold as a TRD Pro and the VIN alone will not catch it. For trim and packages, pull the window sticker by VIN instead, or ask the seller for it.
The VIN is also only the starting point for history. Run it through NHTSA's recall lookup for open campaigns, and use a vehicle history report for title brands, odometer readings and damage events. We sell CARFAX and AutoCheck reports as a licensed reseller, usually around $4.50 to $6.75 a report, against roughly $39.99 to $44.99 if you buy direct. Prices move, so confirm at checkout. And never trust a history PDF the seller emails you. A fake one takes ten minutes to make.
If you are still deciding between model years, our used Toyota Sequoia buying guide covers the generations, and the Toyota Tundra VIN decoder is handy because the two trucks come out of the same Texas plant. For reviews of the current truck, Car and Driver's Sequoia page is a decent read.

Comments (0)
No comments yet. Be the first to share your thoughts!
Log in to leave a comment.