On a 2020 to 2023 Buick Encore GX VIN, the 6th character gives you both the trim and the drivetrain, and the 8th gives you the engine. B is a front-drive Preferred and C an all-wheel-drive Preferred, D and E are the Select in FWD and AWD, and F and G are the Essence in FWD and AWD. In position 8, a 2 means the 1.2-liter turbo three-cylinder and an L means the larger 1.3-liter. We pulled every one of these codes from NHTSA's vPIC decoder on November 19, 2026. One honest caveat up front: our test pattern did not decode any 2024 to 2026 Encore GX VINs, so this guide stops at 2023.
The Encore GX gets mixed up with the older, smaller Buick Encore all the time, in listings and in recall searches. They are different vehicles. The GX arrived for 2020, the plain Encore ended after 2022, and sellers love to blur the two because the names are close. The VIN sorts that out in about ten seconds.
How an Encore GX VIN starts
Every Encore GX VIN we tested began KL4MM, and vPIC put the plant in Bupyeong, South Korea, with the 11th character B. The 7th character was S on everything we decoded. vPIC listed every engine as a three-cylinder, which matches Car and Driver's 2021 review describing the lineup as a pair of turbocharged three-cylinder engines.
The 6th digit: trim and FWD or AWD in one letter
This is the handy part of the GX VIN. GM paired each trim with a front-drive letter and an all-wheel-drive letter, and vPIC returned the same layout from 2021 through 2023:
- B: Preferred, front-wheel drive
- C: Preferred, all-wheel drive
- D: Select, front-wheel drive
- E: Select, all-wheel drive
- F: Essence, front-wheel drive
- G: Essence, all-wheel drive
On 2020 VINs, vPIC gave the same trim names for B through G but left the drive type blank, and it also decoded an A code with no trim name at all. I would read the 2020 letters the same way as the later years, then confirm AWD on the car itself, since the AWD versions use a different transmission. Car and Driver says front-drive models get a CVT while AWD models get a nine-speed automatic. vPIC listed a CVT even on an AWD Select we tested, so do not trust the transmission field in the decoder for this model. Look under the car for the rear driveshaft, or check the shifter and window sticker.
If the seller lists an Encore GX as AWD and the 6th digit is B, D or F, the car is front-drive. That gap is real money, both on the price and on what the car does in snow.
The 8th digit: 1.2 turbo or 1.3 turbo
A 2 in position 8 decoded as the 1.2-liter, and an L as the 1.3-liter, on every year from 2020 to 2023 and across every trim code. Car and Driver puts the 1.2 at 137 horsepower and calls the 1.3 optional at 155. vPIC was willing to pair either engine with any trim, which is probably looser than what Buick actually built, so I would not use the VIN to argue about which trims could get which engine. Use it for the narrow question: which engine is in this car?
The difference is not huge on paper, but you feel it. Car and Driver timed an all-wheel-drive GX with the 1.3 at 9.3 seconds to 60 mph in its 2021 review, and an AWD Avenir with the same engine at 8.8 seconds in the 2024 review. With 18 fewer horsepower, a 1.2 car should be slower still. So if the seller pitches the car as "the bigger turbo" and position 8 shows a 2, you are being sold the smaller engine, and you should price it that way. Test drive it on a highway on-ramp if you can, because that is where the 1.2 runs out of breath first.
The 10th digit, and why 2024 is missing
L is 2020, M 2021, N 2022 and P 2023. When we swapped in R, S and T for 2024, 2025 and 2026, nothing decoded with the same pattern. That fits with the 2024 refresh, which Car and Driver says replaced the Select with the Sport Touring and the Essence with the Avenir. New trims probably mean new letters, and we did not find them in the time we had. For a 2024 or newer GX, run the full VIN through vPIC yourself and check the result against the window sticker. Our window sticker lookup guide shows where to get one.
A made-up example
KL4MMESL7NB100001 decodes as a 2022 Encore GX Select with all-wheel drive and the 1.3-liter. KL4MMBS23LB100001 decodes as a 2020 Preferred with the 1.2. I built both with valid check digits for this post, so neither is a real car. On an actual listing, read the VIN off the windshield plate and the door jamb label instead of trusting the ad. If those two do not match, read our post on the dashboard VIN versus the door sticker before you go any further.
What to do with the result
When the decode and the listing disagree, start with the innocent reasons: a dealer typed the wrong trim, or someone confused the GX with the older Encore. Our guide to a decoder showing the wrong trim covers those and the red flags that mean something worse. The Buick VIN decoder post covers the rest of the brand, and checking Buick recalls by VIN is free and takes a minute. If you are cross-shopping the smaller car, the used Buick Encore buying guide covers it. One quirk we noticed while pulling recalls: NHTSA's API filed at least one 2020 Encore GX seat bolt recall under the plain "Encore" model name, so search recalls by VIN rather than by model.
After the decode, get the history. Ours are licensed CARFAX and AutoCheck resales, and we are not owned by or affiliated with CARFAX, AutoCheck or Experian. Direct from CARFAX, one report has run roughly $39.99 to $44.99; ours have tended to fall between $4.50 and $6.75. That changes, so confirm at checkout. And do not accept a seller's printout as the whole story. PDFs are easy to edit.

Comments (0)
No comments yet. Be the first to share your thoughts!
Log in to leave a comment.