On a GMC Canyon VIN, the 4th digit is the cab, the 5th is the drive, the 6th is the trim and the 8th is the engine. For 2015 to 2022 trucks, a G in position four decoded as a crew cab and an H as an extended cab, a 5 in position five as two-wheel drive and a 6 as four-wheel drive, and the 8th digit read A for the 2.5-liter four, N for the 3.6-liter V6 and 1 for the 2.8-liter diesel. The redesigned 2023 truck uses P for the crew cab and K for the 2.7-liter turbo. We tested all of this in NHTSA's vPIC decoder on November 19, 2026.
The trim letter is the one that bites people. GMC reused the same letters for different trims as the lineup changed, so an E can be a Denali on one truck and an All Terrain on another. That is how a ,000 gap in asking price ends up resting on a single character.
The first three digits and the plant
Every Canyon we decoded began 1GT, GMC's code for a truck built in the US, and vPIC placed them all at Wentzville, Missouri. The 10th digit is the model year, F for 2015, K for 2019, P for 2023 and so on, and the 11th digit on our tests was 1 for Wentzville. If a seller's paperwork says Canyon and the VIN starts with something other than 1GT, stop and find out why before you go further.
The 6th digit: trim, year by year
This is where the shifts happen. On a 2015, vPIC decoded A as Work Truck and B as SLE. By 2017, A was Base, B Work Truck, C SLE, D SLT and E Denali. The 2019 added a trim and moved Denali: A came back with no trim name, B Work Truck, C SLE, D SLT, E All Terrain and F Denali. For 2021 and 2022, GMC renamed the lineup, and B decoded as Elevation Standard, C as Elevation, E as Denali and F as AT4.
The 2023 redesign changed it again. On a crew cab 4WD, B decoded as Elevation, D as AT4, E as AT4X and F as Denali. So an E is a Denali on a 2017, an All Terrain on a 2019, a Denali on a 2021 and an AT4X on a 2023. Always decode with the model year attached, and if a listing says AT4X on a pre-2023 truck, it is wrong, because vPIC returned no AT4X before the redesign.
Cab, drive and engine
Before the cab letter, check the year letter, since every other code depends on it. In our tests the 10th digit ran F for 2015, H for 2017, K for 2019, M for 2021, N for 2022 and P for 2023, following the standard VIN year table. A seller who lists a 2019 with an N in that spot is selling a 2022, which is a different trim lineup and, often, a different price.
On the 2019 trucks we tested, a G in position four came back as a crew cab and an H as an extended cab, and the decode held the trim and engine steady while only the cab changed. Position five is simple: 5 for 4x2 and 6 for 4WD. If a seller swears a truck is four-wheel drive and the VIN shows a 5, believe the VIN, then crawl under it and look for a front driveshaft.
For engines on 2015-2022 trucks, A decoded as the 2.5-liter gas four, N as the 3.6-liter V6 and 1 as the 2.8-liter turbodiesel. The diesel is the one sellers price up, so it is worth the 30 seconds. On 2023 trucks, K came back as the 2.7-liter gas engine, which Car and Driver lists at 310 hp in the current Canyon. The decode also returned a heavier weight class for 2023, Class 2E at 6,001 to 7,000 pounds, against Class 1D for the 2019.
Checking it yourself, step by step
Start with the VIN on the lower driver side of the windshield, then match it to the sticker on the driver door jamb and to the title. On a truck, also look at the bed and the frame if you can, because mismatched or missing labels after a bed swap are worth asking about. Paste the VIN into vPIC and read four fields: Trim, Body Cab Type, Drive Type and Displacement. If the 9th digit check fails, vPIC will say so, and that usually means a typo rather than fraud. Fix the typo before you draw conclusions.
On 2015-2022 trucks, keep the year next to the 6th digit when you read the trim. Write down what each field returned, then compare it to the badges, the wheels and the interior. A Denali has its own interior trim and an All Terrain has its own suspension and tires, so a mismatch between the decode and what you see is usually obvious once you look. If the diesel is the reason you are paying more, confirm the 1 in the 8th spot and look for a diesel exhaust fluid filler next to the fuel cap.
What the decode will not tell you
So you have the right cab, the right trim and the right engine. That still says nothing about how the truck lived. Canyons get towed with, lifted, off-roaded and fleet-used, and none of that shows up in a VIN. A Work Truck with an aftermarket Denali grille looks the part in photos, and the 6th digit is the quickest way to catch it.
For the platform twin, our Chevy Colorado VIN decoder walks through the Chevrolet side, and the GMC VIN decoder covers the brand-level codes. If a free tool shows a trim that does not match the truck, read why decoders show the wrong trim. Before you buy, check the used GMC Canyon buying guide for the mechanical checks, and the Colorado recall check, since many campaigns cover both trucks.
Then pull the history
Our side of it: we resell CARFAX and AutoCheck reports and have no tie to CARFAX, AutoCheck or Experian. One CARFAX report bought direct tends to cost about $39.99 to $44.99. Through us it has mostly been somewhere from $4.50 to $6.75 depending on member or bundle pricing, and that moves, so confirm at checkout.

Comments (0)
No comments yet. Be the first to share your thoughts!
Log in to leave a comment.