On a 2017 and newer Jeep Compass, the VIN starts 3C4NJ, the 5th character gives the trim and drive (C for Latitude front-drive, D for Latitude 4x4, M for Trailhawk, P and R for Sport, E and F for Limited), and the 8th gives the engine: B for the 2.4 liter four and N for the 2.0 liter turbo on newer trucks. The 10th character is the model year. We confirmed those codes by running test VINs through NHTSA's vPIC decoder on November 18, 2026, and there are a couple of spots where the decoder's answer needs a second look.
The 5th character is the one to check when a listing says Trailhawk. Trailhawk badges and trim pieces are easy to buy and bolt onto a cheaper Latitude. We have seen exactly that kind of listing. A fake Trailhawk still has a D in the 5th spot.
3C4: where it was built
All the second-generation Compass VINs we decoded started with 3C4, and vPIC put every one at the Toluca plant in Mexico. The 3 is the country code for Mexico. The first-generation Compass, sold through the 2017 model year alongside the new one, used a different VIN pattern, and we did not decode those here. If someone is selling a 2017 and the VIN does not start 3C4NJ, it may be the older body style, which is a different car, so check which one you are looking at before you compare prices. Our Jeep VIN decoder covers the wider pattern.
The 5th character: trim and drive
For a 2017 truck with the 2.4 liter engine, vPIC decoded the 5th character like this:
- C: Latitude, front-wheel drive (vPIC also lists Longitude and North, the names used outside the US)
- D: Latitude, 4x4
- E: Limited, front-wheel drive
- F: Limited, 4x4
- M: Trailhawk, 4x4
- P: Sport, front-wheel drive
- R: Sport, 4x4
The 2020 trucks we tested decoded C and D the same way. On a 2023 truck with the turbo engine, vPIC only returned clean Compass results for D (Latitude, 4x4) and M (Trailhawk, 4x4) among the combinations we tried, so newer trims may use codes we did not hit. Treat the list above as solid for the earlier trucks and a starting point for later ones. The 6th and 7th characters were B on every Compass we decoded.
The drive code is the part people get burned on most. A front-drive Compass and a 4x4 look identical from the outside, and plenty of buyers in snow states pay a 4x4 price for a front-drive truck without knowing it. The odd letters in the list above, C, E and P, are the front-drive versions. If you need four-wheel drive, rule those out before you even schedule a test drive.
The 8th character: the engine
B decoded as the 2.4 liter four-cylinder, rated by vPIC at 184 horsepower on 2017 trucks and 180 on 2020 and 2023 examples. N decoded as the 2.0 liter turbo. vPIC listed 200 horsepower for a 2023 Latitude with N, and a higher number for the Trailhawk that we would not lean on without checking Jeep's own spec sheet. That gap is one reason to treat decoder horsepower as a hint rather than a spec.
One warning here. When we cycled the 8th character on a 2023 VIN, vPIC also decoded letters for engines a Compass never had, including big V8s and a diesel, because it was matching a Chrysler-wide pattern. So if a Compass VIN decodes to something wild, assume a typo or a fake before you assume a rare truck.
Where to read the VIN, and what to compare
Do not decode the VIN from the listing text alone. Sellers mistype them, and sometimes the typo is not an accident. Read it off the plate at the base of the windshield on the driver's side, then compare it with the sticker on the driver's door jamb and the title or registration. All three should match character for character. If the dash plate looks scratched, re-riveted or covered, that is a bad sign, and it is worth walking away over. Once you have a VIN you trust, decode it, then compare the decoded trim and engine with the badges, the window sticker if the seller still has it, and the listing price. A Latitude priced like a Trailhawk is the most common mismatch we see on these, followed by a front-drive truck sold as a 4x4 because it looks the same parked in a driveway. A C in the 5th spot settles that question in about ten seconds.
Check digit, year and serial
The 9th character is the check digit, computed from the other 16, and vPIC tells you when it does not add up. Our check digit guide shows how. The 10th character is the year: H for 2017, L for 2020, P for 2023. The 11th is the plant and the last six are the serial number.
Example: 3C4NJDBB9LT600001 is a test VIN we built with a valid check digit. 3C4 is a Mexico-built Jeep, NJ is the Compass, D is Latitude 4x4, B and B fill the 6th and 7th spots, B is the 2.4, 9 is the check digit, L is 2020, T is the plant and 600001 is the serial. vPIC returned exactly that.
After the decode
A decoded VIN tells you what the truck was, not what happened to it. Run it through NHTSA's recall lookup next. Our Compass recall check lists what to look for by year, and the used Compass buying guide covers the test drive. The IIHS ratings page for the 2023 Compass is worth a look if crash results matter to you.
Then check the history. We are a licensed CARFAX and AutoCheck reseller and are not part of CARFAX, AutoCheck or Experian. Members have paid about $4.50 a report through November and guests around $5.50, with the two-report bundle close to $6.75, versus roughly $39.99 to $44.99 from CARFAX itself. Those prices may vary, so confirm at checkout. Also, if a seller only offers a screenshot of a report, ask for the VIN and run your own. Screenshots are easy to fake.

Comments (0)
No comments yet. Be the first to share your thoughts!
Log in to leave a comment.