⚡ Limited Time: Get your Carfax and Autocheck for $4.50 when you sign up! - instant delivery
CheapCarfaxAutocheck
Pricing Membership FAQ Support Blog
← All articles / Buying Guides
Buying Guides November 19, 2026 · 6 min read

Kia K5 VIN Decoder: Trim and 1.6T vs 2.5T Engine Codes

An 8 in the 8th VIN spot means the 2.5 turbo. Here is how to read K5 trim codes, and what vPIC will not tell you.

CE
CheapCarfaxAutocheck Editorial Team
Vehicle History Research Team
Kia K5 VIN Decoder: Trim and 1.6T vs 2.5T Engine Codes

On a 2021 to 2024 Kia K5, the 5th character of the VIN tells you the trim and the 8th tells you the engine. When we ran test VINs through NHTSA's vPIC decoder on November 19, 2026, a 1 in the 5th spot came back LXS, 2 was LX, 3 was EX, 4 was GT and 6 was GT-Line. In the 8th spot, 2 meant the 1.6 liter turbo and 8 meant the 2.5 liter turbo. Every K5 VIN we tried started with 5XXG. The one thing vPIC would not tell us was whether the car has all-wheel drive.

That last gap matters more than it sounds. Kia sold the K5 with front-wheel drive or all-wheel drive, and the GT is a different animal from the rest of the range. Car and Driver lists the GT's 2.5 turbo at 290 horsepower against 180 for the standard 1.6, and says the GT is front-drive only with its own dual-clutch gearbox. If a listing says "K5 GT AWD," somebody made a mistake, and you want to know who before you hand over a deposit.

5XXG: what the first four characters say

5XX identifies Kia as the maker, and every K5 test VIN we decoded came back with the plant country listed as the USA. The G in 4th place decoded as K5 each time. The K5 replaced the Optima, so if the sedan in front of you is a 2020 or older car wearing Optima badges, our used Optima guide is the right page, and the VIN rules will not match this one. For the brand-wide basics, like how Kia uses the 10th and 11th characters, see our Kia VIN decoder.

Get articles like this every week
Field guides, red flags, and the occasional discount.

Trim: the 5th character

These are the 5th-character results from our 2021 to 2024 test VINs:

  • 1: LXS
  • 2: LX (2021 and 2022 only; it did not decode on our 2023 or 2024 VINs)
  • 3: EX
  • 4: GT
  • 6: GT-Line

The missing LX on later years lines up with Car and Driver's note that Kia dropped the base LX for 2023 and made the LXS the entry trim. So a 2023 K5 VIN with a 2 in the 5th spot is worth a second look, because it did not decode for us at all. We did not find a separate code for the GT-Line AWD. That is the trim where all-wheel drive shows up most often on used listings, and vPIC left the drive type blank on every K5 we tried. Check the trunk badge, look underneath for a rear driveshaft, or get the window sticker. Our guide to pulling a window sticker by VIN explains how.

Engine: the 8th character

A 2 in the 8th position decoded as a 1.6 liter turbocharged four on every year we tested. An 8 decoded as the 2.5 liter turbo. On our 2023 VINs, vPIC also listed the transmission as dual-clutch whenever the trim was GT, and as a plain automatic for the others, which matches how Kia built the car. One warning, though. vPIC reads each position on its own, so it will decode an LXS with an 8 in the engine slot without complaining. That does not mean Kia ever built one. If the trim and engine codes do not make sense together, treat it as a reason to dig, and check the VIN plate against the door-jamb label before anything else.

The 6th, 7th and 11th characters

Every K5 test VIN we ran had a 4 in the 6th spot. In the 7th, we tried J, A, D and L, and all four decoded to the same trim and engine, so we would not read anything into that letter. The 11th character was G for each year. vPIC labeled the plant Buford on our 2022 VINs and West Point on the 2024 ones, but it is the same plant code either way. Honestly, we would not argue with a seller over that label.

Check digit, year and serial

Position 9 is the check digit, and a typo or a faked VIN usually breaks it. Our check digit explainer shows the math. Position 10 is the model year: M for 2021, N for 2022, P for 2023 and R for 2024. Positions 12 to 17 are the serial number.

Example: 5XXG44J83PG100001 is a made-up test VIN with a valid check digit. 5XXG makes it a K5, 4 is GT, 4 and J fill the 6th and 7th spots, 8 is the 2.5 turbo, 3 is the check digit, P is 2023 and G is the plant. vPIC decoded it clean as a 2023 K5 GT with a dual-clutch transmission. We could not get any 2025 K5 VIN built on the same pattern to decode, so this guide stops at 2024. If you are looking at a 2025, put the real VIN in vPIC and read what comes back.

Recalls to check after the decode

Run the VIN through NHTSA's recall search and Kia's owner recall page. When we pulled NHTSA's records, the one that stood out was 25V-794, which covers 2021 to 2024 K5s where a damaged check valve can let air into the fuel tank so it expands, touches hot exhaust parts and melts. NHTSA lists a fire risk. Dealers replace the valve and inspect the tank, and owner letters went out January 16, 2026, so plenty of cars may still be open. 21V-519 covers 2021 and 2022 cars with the 2.5 turbo for a fuel leak at the high-pressure pump pipe, and 23V-149 covers 2021 to 2023 cars whose side curtain air bags may have been installed wrong. The K5 is also part of the Hyundai and Kia theft story, so read our page on the anti-theft software upgrade before you buy one with a key ignition.

After the recalls, get the history. We sell CARFAX and AutoCheck reports as a licensed reseller and have no ownership link to CARFAX, AutoCheck or Experian. In mid-November 2026 our checkout has been running about $5.50 for a guest report, $4.50 for members and around $6.75 for both reports together, while CARFAX's own site tends to charge $39.99 to $44.99 for one. Those numbers shift with promotions, so confirm at checkout. And skip any seller's "free report" PDF unless the VIN printed on it matches the car; a PDF is easy to edit and easy to borrow from a different K5.

Sources

Run a report
Don't buy without checking the VIN
Carfax + AutoCheck from $4.50 · Instant · 60 seconds
Run a report →