For a late-model Nissan Maxima, the 7th character of the VIN is the one that tells you the trim: B for S, C for SV, D for SL, E for SR and F for Platinum on the 2020 patterns I decoded through NHTSA's vPIC tool on November 20, 2026. The first six characters, 1N4AA6, just say "Maxima built in Smyrna, Tennessee." And ignore any decode that calls a Maxima four-wheel drive. Every Maxima of this generation is front-drive, and that "4WD" label is a vPIC data error you'll run into if you decode enough of them.
Reading 1N4AA6 and the plant
Every Maxima VIN I tested began 1N4AA6. 1N4 is the Nissan manufacturer code vPIC ties to these U.S.-built cars, and AA6 is the Maxima body in its table. All of the decodes put the car at Nissan's Smyrna, Tennessee plant, listed it as a sedan with a 3.5 liter V6, and the 2020 and 2022 batches agreed on that. The 10th character is the model year (H for 2017, L for 2020, N for 2022), and our model year code guide covers the full letter cycle.
Car and Driver rates the V6 at 300 horsepower through a CVT, and its spec sheet for a 2019 Platinum lists the car as front-engine, front-wheel drive. The magazine also notes that 2023 was the Maxima's final model year. So every used one you find will be a 2023 or older, which is worth remembering when a dealer calls a car "nearly new."
The 7th character: trim by year
On the 2020 patterns, vPIC returned five trims cleanly. B decoded as S, C as SV, D as SL, E as SR and F as Platinum. On the 2022 patterns only three came back: C as SV, E as SR and F as Platinum. B and D returned nothing for 2022, so if a 2022 listing says "SL," check the window sticker before you believe it.
The 2017 batch was a letdown. vPIC decoded the Maxima basics on every working pattern (body, engine, plant) but returned no trim at all. On a 2016-2018 car, the VIN alone won't tell you if the car in front of you is an SR or a base S. Use the build sticker, the original window sticker or a dealer lookup instead.
That matters because the SR and Platinum are the trims people pay extra for. Car and Driver says the more advanced driver-assistance tech is on those two, and the SR is the one it singled out for handling. A seller has every reason to round up.
The 8th character and the fake 4WD
This is the weird one. On the 2020 patterns, vPIC decoded the 8th character as H, K, P or V for "4x2," which is right, but F, L, R and W came back as "4WD/4-Wheel Drive." The 2017 and 2022 batches showed the same pattern. On 2020, B, C and D in the 8th spot decoded with an error flag and no drive type at all.
A Maxima has never offered all-wheel drive in this generation, so any decode that says 4WD is a data glitch in vPIC's Nissan table, not a rare option. I'd mention this to anyone who uses a free decoder to sanity-check a listing. If a seller's ad says "AWD Maxima," they probably copied a bad decode. If the car really has a driveshaft running to the rear, something very strange has happened to it, and you should walk.
Spotting a bad or altered VIN
Most VIN problems on a used Maxima are boring: a listing typo, an O typed for a 0, a dropped character. Run the VIN, and if the check digit fails, re-read it off the windshield plate and the door jamb label rather than the ad. Our guide to the check digit explains why that 9th character exposes most typos. The broader Nissan VIN decoder page covers the Altima and Sentra patterns if you're cross-shopping.
The less boring problem is a VIN that decodes perfectly but belongs to a different car. Cloned VINs get copied from real, clean cars, so a clean decode proves nothing on its own. Compare the VIN in three places on the car and on the title. If any one of them looks different, stop.
A two-minute listing check
When I'm looking at a Maxima ad, this is the order I go in. First, the 10th character against the year in the ad, because a 2019 listed as a 2020 is an easy mistake to make and an expensive one to miss. Second, the 7th character against the trim in the ad, using the year's chart above. Third, the plant field, which should say Smyrna. Fourth, I skip the drive type entirely, for the reason above. If all four line up, the car is at least what the seller says it is on paper. If the trim letter says SV and the ad says Platinum, ask for the window sticker before you drive across town. Sometimes it's a dealer-installed package and sometimes it's wishful thinking, and a seller who can't explain it has probably told you something useful about how the rest of the sale will go.
What else to check on a used Maxima
The decode tells you what Smyrna built. It doesn't tell you whether the CVT has been replaced, whether the car sat in floodwater, or whether it spent two years as a rental. Nissan's CVT warranty history is its own topic, covered in our post on Nissan CVT extended warranties, and the open recalls are in the Nissan Maxima recall check. For general shopping advice, see the used Nissan Maxima buying guide.
Then pull a history report on the VIN you just decoded. Don't rely on the PDF the seller emails you, because nothing ties it to the car in the driveway. We're a licensed CARFAX and AutoCheck reseller, not affiliated with CARFAX, AutoCheck or Experian, and official reports always cost something. One report at retail generally runs $39.99 to $44.99; ours has typically been about $5.50 as a guest, $4.50 for members, or about $6.75 for the pair. Prices shift, so confirm at checkout.
Sources
- NHTSA vPIC VIN decoder (Maxima batches for 2017, 2020 and 2022 decoded November 20, 2026)
- vPIC decode of 1N4AA6FV4NC300000
- Car and Driver, Nissan Maxima review
- 49 CFR Part 565, VIN requirements (eCFR)

Comments (0)
No comments yet. Be the first to share your thoughts!
Log in to leave a comment.