⚡ Limited Time: Get your Carfax and Autocheck for $4.50 when you sign up! - instant delivery
CheapCarfaxAutocheck
Pricing Membership FAQ Support Blog
← All articles / Buying Guides
Buying Guides November 20, 2026 · 6 min read

Nissan Versa VIN Decoder: Trim and Manual vs CVT Codes

The 7th character on a newer Versa VIN tells you the trim and whether it's a stick. What vPIC returned for 2020 and 2024.

CE
CheapCarfaxAutocheck Editorial Team
Vehicle History Research Team
Nissan Versa VIN Decoder: Trim and Manual vs CVT Codes

On a 2020-2024 Nissan Versa sedan, the 7th character of the VIN gives you both the trim and, on the S, the gearbox: B is the S with the manual, D is the S with the CVT, E is the SV and F is the SR. That's what NHTSA's vPIC decoder returned for the 2020 and 2024 patterns I ran on November 20, 2026. Older 2017-and-earlier Versas decode with almost no trim detail, so for those you'll need the window sticker.

The first six characters: 3N1CN8

Every third-generation Versa sedan pattern I tested began 3N1CN8. The 3N1 prefix is the Nissan code vPIC links to cars from its Aguascalientes plant in Mexico, and every decode listed that plant. CN8 is the current Versa sedan in vPIC's table. The previous sedan used CN7, and a 2017 pattern starting 3N1CN7 decoded as a Versa with a 1.6 liter engine rated at 109 horsepower but no trim at all. If you're shopping a 2019 or older, keep that in mind before you rely on a free decode to confirm "SV" or "SL."

The 10th character is the year: L for 2020 and R for 2024 in my batches. If a seller says 2021 and the 10th character is L, the car is a 2020. Our year code chart has every letter.

Get articles like this every week
Field guides, red flags, and the occasional discount.

The 7th character: trim and transmission

Here's how the 2020 patterns decoded:

  • B: S, manual transmission
  • C: labeled "Base (CVT)" by vPIC
  • D: S, CVT
  • E: SV, CVT
  • F: SR, CVT

The 2024 patterns matched with one change: C didn't decode at all, and B and D both came back simply as "S," with the manual and CVT listed in the transmission field. That lines up with Car and Driver's review, which says the five-speed manual is the default on the base car, the CVT is available on the S and standard on the SV and SR. So a 2024 Versa with a B in the 7th spot should have three pedals. If the listing says automatic, one of them is wrong, and it's worth finding out which before you drive out to see it.

I'd pay attention to that manual-versus-CVT split. Fewer shoppers want a manual, so a B car may take longer to sell, and that can work in your favor on price if you're happy shifting yourself. If you aren't, the 7th character saves you a wasted trip.

The drive-type glitch

Every Versa sends power to the front wheels, which Car and Driver confirms. But when I varied the 8th character on a 2020 S pattern, vPIC decoded F, L, R and W as "4WD/4-Wheel Drive," while H, K, P and V came back as front-drive (4x2). B, C and D returned an error with no drive type. It's a table error in vPIC, not a hidden all-wheel-drive Versa. Free decoder sites that scrape vPIC repeat the mistake, so don't be surprised when one tells you the economy sedan in front of you is a 4x4.

Every real Versa pattern I decoded also showed the same 1.6 liter four. Car and Driver lists it at 122 horsepower. No other engine has been offered in this generation, so an engine field showing anything else points to a typo in the VIN.

Matching the decode to the car in front of you

Once you have the decode, spend two minutes checking it against the actual car. Look at the shifter first: a B-code car should have a clutch pedal, and anything else should have a CVT. Then look at the badge on the trunk lid and compare it with the 7th character. Badges are cheap and easy to add, so if the trunk says SR and the VIN says S, believe the VIN. Open the driver's door and read the certification label on the jamb. It shows the month and year of manufacture, which should make sense next to the 10th character. A car built in late 2019 can be a 2020 model, but a car built in 2018 can't.

If the decode and the car disagree and the seller can't explain it, ask a Nissan dealer to look up the VIN. They can usually tell you how the car was originally equipped, and it costs you a phone call instead of a bad purchase.

Typos, clones and the door jamb

A Versa VIN that won't decode is almost always a typo from the listing. VINs never use the letters I, O or Q, so if you see one, the seller mistyped. Re-read the VIN off the windshield plate and compare it with the label on the driver's door jamb. Our guide to vPIC error codes explains what each error message means, so you can tell a typo from a VIN that was never valid.

A VIN that decodes perfectly can still be a problem. Cheap, common cars are good candidates for cloning because nobody looks twice at another silver Versa. A clean decode only proves the VIN is well-formed. It doesn't prove the VIN belongs to that car. Check the title, the dash plate and the jamb label all match.

Recalls, history and the end of the line

Car and Driver has reported that Nissan planned to drop the Versa after the 2025 model year, which means parts and dealer support will keep going for years, but every Versa you shop is already used or leftover stock. Check open recalls in our Nissan Versa recall check and read the used Nissan Versa buying guide for CVT and maintenance questions. The Nissan VIN decoder covers the Sentra and Kicks if you're cross-shopping.

Cheap compact sedans often pass through rental fleets, and the VIN won't tell you whether this one did. A history report usually will. Pull one on the VIN you decoded rather than trusting a seller's printout. We're a licensed CARFAX and AutoCheck reseller, not affiliated with CARFAX, AutoCheck or Experian, and official reports aren't free anywhere. Retail tends to be about $39.99 to $44.99 per report; ours has typically been around $5.50 as a guest, $4.50 for members, or about $6.75 for both. Prices can move, so confirm at checkout.

Sources

Run a report
Don't buy without checking the VIN
Carfax + AutoCheck from $4.50 · Instant · 60 seconds
Run a report →