On a 2017-2020 Kia Cadenza VIN, look at the 5th character: B is Premium, C covers the middle trims, and E is Limited on the 2019-2020 cars. Every U.S. Cadenza starts KNAL, carries 5 in 11th place for Kia's Hwasung plant in Korea, and has the 290 hp 3.3-liter V6, so the VIN is mostly a trim and year check. The 2014-2016 first-generation car uses a different pattern and has a windshield recall you should not skip.
Second generation (2017-2020) position by position
Kia's Part 565 filings for the redesigned car are short and consistent. I used the 2017 decoding guide and the 2020 decoding guide, both on NHTSA's vPIC site:
- 1-3 (KNA): Kia Motors Corporation, passenger car.
- 4 (L): Kia Cadenza.
- 5: model series (see the year-by-year note below).
- 6 (4): 4-door sedan.
- 7: restraint code. The 2017 sheet lists A, D, J and L; the 2020 sheet lists A, D, J, L, P and R.
- 8 (1): 3.3-liter DOHC GDI Lambda II V6, 290 hp.
- 9: check digit.
- 10: H 2017, J 2018, K 2019, L 2020.
- 11 (5): Hwasung, Korea (the 2017 sheet adds "exported vehicle").
The 5th character changed meaning
This is the part that trips people up. In 2017, B meant Premium and C lumped together "Premium Pano, Premium Luxury, Tech, Limited," so a 2017 VIN cannot tell you whether a C car is a Tech or a Limited. By 2020 Kia split it out: B Premium, C Technology, E Limited. My test VINs through the vPIC decoder on November 21, 2026 matched that. KNALC4J16H5012345 decoded as a 2017 Cadenza with the long four-trim label, KNALE4J12L5012345 decoded as a 2020 Limited, and KNALB4J13K5012345 came back as a 2019 Premium (Base) with a curb weight note of 3,633 to 3,799 lbs. All three showed 290 hp and Hwasung. When I tried D in 5th place on a 2020 test, vPIC returned errors 4 and 14 and refused to name a model. If a seller claims a 2017 is a Limited, ask for the window sticker, because the VIN alone will never prove it. Our article on decoders showing the wrong trim covers how to settle that.
First generation (2014-2016)
The early Cadenza also starts KNAL but uses different letters after that. My test KNALN4D79E5012345 decoded as a 2014 Cadenza EX with the 3.3 V6 GDI Lambda II, built in Hwasung. I did not have a clean filing for every first-gen trim, so I would not lean on the 5th character for those years beyond confirming the model and year. If vPIC throws an error on an older car, our rundown of NHTSA decoder error codes translates the numbers.
Sanity checks beyond the decoder
Look at the VIN plate through the windshield, the sticker on the driver door jamb and the title, then compare them before you decode anything. A Cadenza VIN should start KNAL; if it starts with a Kia prefix but a different 4th character, you are probably looking at an Optima, K5 or Stinger whose listing got mislabeled. Next, match the 10th character to the year in the ad. Because the 2017 through 2020 cars look alike and share an engine, a 2017 priced as a 2019 is an easy mistake for a lot attendant to make, and it changes both the value and which recalls apply. Finally, read the 5th character against the trim claimed and against the equipment on the car. On a 2020 car an E should line up with the Limited features; on a 2017, a C just means "one of the upper trims" and the sticker has to do the rest. If anything does not line up, ask before you drive two hours to see it.
Recalls you need to clear
I queried NHTSA's recall API by model year on November 21, 2026, and the first-gen car has one I would treat as a deal breaker until it is fixed: 22V158 covers all 2014-2016 Cadenzas, about 30,000 cars, because the front windshield may not have been properly bonded and could detach. 14V289 covered certain 2014 cars with 19-inch non-chrome aluminum wheels. Then there are the ABS hydraulic control unit fire campaigns. 23V652 includes 2014-2016 Cadenzas in a campaign covering about 1.73 million Kias, and 21V137 covers certain 2017-2021 Sportage and Cadenza models; both advise parking outside and away from structures until the repair is done. A 2017 batch also had 17V190 for a brake vacuum hose that may kink, and certain 2020 cars got 22V022 for rear power windows that kept working after the ignition was off. Our Hyundai and Kia ABS fire recall guide has the details, and the exact VIN belongs on NHTSA's recall lookup.
What it is worth and why that makes the VIN matter
Car and Driver's Cadenza page listed a used price range of about $16,200 to $20,998 for the 2020 car when I checked, praising the smooth V6 and the long warranty terms. That warranty matters on a used one, but only if the car's history supports it, so check whether it was ever branded or written off. A big front-drive sedan like this also attracts the "only driven to church" type of listing, and I have learned to read that as a request to check the odometer history. If you are weighing it against the newer Kia sedan, our K5 decoder and the used Cadenza buying guide are good next stops, along with the brand-wide Kia VIN decoder.
Getting a history report
A decode tells you what Kia built. It does not tell you about the last ten years. Licensed resale is what we do: CARFAX and AutoCheck reports, sold by a company that CARFAX, AutoCheck and Experian neither own nor endorse. Direct purchase usually lands between $39.99 and $44.99. Guests here have recently paid near $5.50, members near $4.50 and bundle buyers near $6.75; it changes, so confirm at checkout. Do not accept a forwarded PDF as your only report.


Comments (0)
No comments yet. Be the first to share your thoughts!
Log in to leave a comment.